galvanized welded wire mesh

Galvanized welded mesh is a type of metal mesh product made of high-quality low-carbon steel wire, which is spot welded and formed by automated and meticulous mechanical equipment, and then subjected to surface treatment such as galvanizing (hot or cold plating). Here is a detailed introduction:

Product features:

Good anti-corrosion performance (based on actual reports): The galvanized layer can effectively isolate air and moisture, prevent steel wire rust, and the hot-dip galvanized welded mesh has good anti-corrosion performance (based on actual reports) and a relatively long service life.

Smooth mesh surface: Through meticulous mechanical welding, the mesh surface is smooth and neat, overall beautiful, and easy to install and use.

Sturdy structure: The mesh is uniform, the welding is firm, the welding points can withstand certain tensile and compressive forces, are not easy to open, have good overall performance, and are not easy to loosen even if partially cut or subjected to pressure.

Economical: Using low-carbon steel wire as raw material, with mature production technology, relatively low cost, and high cost-effectiveness.

Specification parameters:

Wire diameter: The common wire diameter is generally between 0.3mm-0.9mm, used for insulation and crack prevention of building walls. There are also thicker wire diameters that can be customized according to needs, such as galvanized welded mesh wire diameter of up to 2mm for some fences in the breeding industry.

Mesh: The aperture can be 1/2 inch, 3/4 inch, 1 inch, etc., converted to millimeters. Common specifications include 12.7 × 12.7mm, 19.05x19.05mm, etc. Galvanized welded mesh (corn mesh) used for drying crops, with mesh sizes mostly 5 cm × 5 cm or 5 cm × 7 cm.

Width and length: The width is usually 0.914m, 1m, 1.2m, 1.5m, etc., and the length is generally 10-50 meters, which can be customized according to customer requirements.

Surface treatment method:

Hot dip galvanizing: Dip the steel wire into molten zinc solution to tightly bond the zinc layer with the steel wire. The coating is thick, generally between 0.08 and 0.12 millimeters, with good corrosion resistance (based on actual reports) and a service life of over 7 years.

Cold galvanizing (electroplating): Galvanizing the surface of steel wire at room temperature through electroplating process, with a relatively thin coating and lower corrosion resistance (based on actual reports) compared to hot-dip galvanizing, but with a brighter appearance and lower cost.

Application industry:

Construction industry: It is a commonly used material for wall insulation and crack prevention engineering, and can also be used for plastering and hanging nets on exterior walls, one-on-one mesh sheets for floor heating, etc. It can enhance the tensile strength of walls and prevent wall cracking. It can also be used as a partition net for high-rise new buildings, as well as a Shu Le She board net.

Animal husbandry: It can produce animal cages and animal fences, such as fox, mink, chicken, duck and other breeding fences, with good protective performance and ventilation.

Agricultural industry: It can be used to dry crops such as corn nets, which is beneficial for ventilation and drying of crops. It can also be used as a fence for flowers and trees to protect them.

Transportation industry: It can be used for safety protection of highways, railways, airports, ports, etc., such as barriers, guardrails, etc., which can play a role in isolation and protection.

Other aspects: It can be used to make machine protective covers, home office food baskets, paper baskets, and decorations. It can also be used as a support net for rockery plastering in rockery projects.